VPS侦探论坛

 找回密码
 注册
查看: 5015|回复: 2

[总结] centos 5.3下fdisk分区、格式化、挂载新硬盘

[复制链接]
发表于 2011-10-11 13:46:40 | 显示全部楼层 |阅读模式



centos 5.3 下 fdisk分区、格式化、挂载新硬盘

公司内网的服务器硬盘空间不足,将新买来的150G硬盘挂载并设置成samba的共享目录,

下面介绍怎样将一块新硬盘分区、格式化、挂载到系统,如适合你请继续阅读。
服务器上已经有两块硬盘,所以硬盘为sdc,后面就不做说明了。

1、
# fdisk -l
查看当前磁盘信息,就会发现最下面显示新加入的硬盘不是有效分区,如下:
=======================================================
Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdc doesn't contain a valid partition table
=======================================================


2、
# fdisk /dev/sdc
对新硬盘分区,并根据提示进一步操作:
=======================================================
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.

The number of cylinders for this disk is set to 182401.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
=======================================================
Command (m for help): h 输入h可查看帮助命令
h: unknown command
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
=======================================================
Command (m for help): n 输入n进行分区
Command action
e extended
p primary partition (1-4)
p 输入p为主分区,e为逻辑分区
Partition number (1-4): 1 由于是新盘我们输入1来分第一个主分区,共可以分4个主分区
First cylinder (1-182401, default 1): 选择该分区的起始磁盘数,如无特殊需求强烈建议选择默认,也就是1来分区(直接按回车)
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-182401, default 182401):
定义该分区的大小,如果按默认(按回车)即是使用全部可用存储额,如分一个1G的空间,输入+1024m
Using default value 182401

Command (m for help): w 写入分区
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
=======================================================


3、
# fdisk -l
可以找到我们刚才分的一个分区,内容如下:
=======================================================
Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdc1 1 182401 1465136001 83 Linux
=======================================================


4、
# mkfs -t ext3 -c /dev/sdc1
对分区使用ext3格式化,如多个分区sdc2等以此类推,
因为新硬盘加了-c参数要先检测磁盘坏道,此过程万分漫长(150G),等待。。。
=======================================================
mke2fs 1.39 (29-May-2006)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
183156736 inodes, 366284000 blocks
18314200 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=0
11179 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
102400000, 214990848

Checking for bad blocks (read-only test): done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 22 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
=======================================================


5、
# mkdir /var/samba
新建挂载目录

6、
# mount -t ext3 /dev/sdc1 /var/samba
挂载新硬盘


7、
# df -hal
查看分区大小是否和我们预定的一样:
文件系统 容量 已用 可用 已用% 挂载点
/dev/sda7 9.5G 3.2G 5.9G 35% /
/dev/sda6 9.5G 151M 8.9G 2% /tmp
/dev/sda5 19G 3.6G 15G 20% /usr
/dev/sda3 19G 719M 18G 4% /home
/dev/sda2 230G 23G 196G 11% /var
/dev/sda1 99M 25M 69M 27% /boot
/dev/sdb1 233G 156G 78G 67% /var/samba2
tmpfs 1008M 0 1008M 0% /dev/shm
/dev/sdc1 1.4T 198M 1.3T 1% /var/samba         ////此行为新硬盘


8、
# vi /etc/fstab
设置系统自动挂载硬盘,加入一行:
/dev/sdc1 /var/samba2 ext3 defaults 0 0


9、重启服务器,用步骤7检查一下,一切正常挂载完成
============================================================
以上所有过程 均在我使用的 公网 CentOS 服务器上,操作完成的~~~~
美国VPS推荐: 遨游主机LinodeLOCVPSKVMLAVPS2EZ搬瓦工80VPSVultr美国VPS主机中国VPS推荐: 阿里云腾讯云。LNMP付费服务(代装/问题排查)QQ 503228080
 楼主| 发表于 2011-10-11 14:01:36 | 显示全部楼层


除了 上面的 主贴外,

我再补充一个文档:《Centos挂载未使用硬盘教程--vps+lvm》

请大家直接下载附件吧!!附件为 rar压缩包格式,解压出来是 word 文档来的!

谢谢

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x
Linux下Nginx+MySQL+PHP自动安装工具:https://lnmp.org
您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|手机版|Archiver|VPS侦探 ( 鲁ICP备16040043号-1 )

GMT+8, 2021-6-22 23:12 , Processed in 0.071316 second(s), 27 queries .

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表